Was wir tun
Build volume up to 900 × 600 × 800 mm
Build volume up to 900 × 600 × 800 mm
Engineering materials ABS, ASA, PC, PETG, PEI, PPS
Engineering materials ABS, ASA, PC, PETG, PEI, PPS
Soluble support
Soluble support for internal channels on dual-extruder machines
Carbon-fibre and glass-fibre reinforced filaments
Carbon-fibre and glass-fibre reinforced filaments
Enclosures, jigs, fixtures and shop-floor aids
Enclosures, jigs, fixtures and shop-floor aids
Low cost per cubic centimetre
Low cost per cubic centimetre for large parts
Materialien
| ABS and ASA |
| Polycarbonate and PC-ABS |
| PETG and PLA |
| PEI Ultem 1010 and 9085 |
| Carbon-fibre filled nylon |
| PPS and PPSU |
Wichtigste Spezifikationen
| Spezifikation | Details |
|---|---|
| Layer height | 0.1–0.3 mm |
| Tolerance | ±0.3 mm or ±0.3 % |
| Build size | 900 × 600 × 800 mm |
| Lead time | 3–5 working days |
| Wall thickness | 1.2 mm minimum |
| Supports | Breakaway or soluble |
Oberflächen & Nachbearbeitung
Sanding and vapour smoothing for ABS
Sanding and vapour smoothing for ABS
Priming and painting
Priming and painting
Epoxy coating for sealing
Epoxy coating for sealing
Insert installation and tapping
Insert installation and tapping
Häufige Fragen
Why choose FDM over SLS?
Cost and size. FDM is typically much cheaper per part for large, simple geometry and can produce parts far bigger than a powder bed. The trade-off is visible layer lines and anisotropic strength.
Are FDM parts strong enough for fixtures?
Yes, in the right material. PC, PEI and carbon-filled nylon fixtures stand up to everyday production use, and we orient the print so layers run perpendicular to the main load.
Can you print food or medical-safe parts?
We offer food-contact approved filament and PEI grades that tolerate autoclaving, but for regulated medical devices we would normally steer you to MJF in a validated material.
3D Printing capabilities
3D Printing overview
SLA, SLS, MJF & FDM. Nylon, resin, carbon-filled. Parts from 2 days.
SLA 3D Printing
Stereolithography printing at 0.05 mm layers for smooth, high-detail models. Transparent, tough and high-temperature resins, parts shipped in 2 days.
SLS 3D Printing
Selective laser sintering of PA12, PA11, glass-filled nylon and TPU. No support structures, tough functional parts, batch production without tooling.
MJF 3D Printing
HP Multi Jet Fusion printing with consistent mechanical properties and fine surface detail. PA12 and PA11 parts with production-grade repeatability.
DLP 3D Printing
Digital light processing for high-resolution small parts, dental models and micro detail. 0.03 mm layers with optical-grade surface quality.
Bereit, Ihr {service}-Projekt zu starten?
Senden Sie heute Ihre Dateien — DFM-geprüftes Angebot innerhalb von 24 Stunden.