Was wir tun
Coefficient of friction as low as 0.05
Coefficient of friction as low as 0.05
Chemically inert to most media
Chemically inert to most media
Non-stick and easy to clean
Non-stick and easy to clean
Operating range from −200 to +260 °C
Operating range from −200 to +260 °C
Available in black, green and blue
Available in black, green and blue
Applied to complex geometries
Applied to complex geometries
Materialien
| Aluminium and steel parts |
| Stainless steel |
| Brass and copper |
| Certain high-temperature plastics |
Wichtigste Spezifikationen
| Spezifikation | Details |
|---|---|
| Thickness | 15–50 µm |
| Friction coefficient | 0.05–0.2 |
| Temperature | −200 to +260 °C |
| Colour | Black, green, blue, grey |
| Materials | Steel, aluminium, stainless |
| Lead time | 4–8 working days |
Oberflächen & Nachbearbeitung
Baked curing after application
Baked curing after application
Multi-layer coating systems
Multi-layer coating systems
Base primer for adhesion
Base primer for adhesion
Häufige Fragen
How durable is a PTFE coating?
It is softer than the substrate and wears under high loads or abrasive media, so it suits sliding contacts and non-stick duties rather than heavy abrasion. We specify the grade accordingly.
Does it need a primer?
On most metals yes, a primer improves adhesion, and the coating is applied in layers and then baked. Without proper preparation the film can blister or flake.
Can it be used for food contact?
Certain PTFE grades are approved for food contact, and we specify those where required. The coating must also be cured correctly to meet the standard.
More in this section
Anodizing
Type II and Type III anodizing for aluminium: clear, black and colour finishes with improved corrosion and wear resistance, thickness from 5 to 50 µm.
Hard Anodizing
Type III hard anodizing builds a 25-50 µm ceramic-like oxide layer with up to 500 HV surface hardness for wear-critical aluminium parts.
Bead Blasting
Glass bead blasting for a uniform satin finish on metal and plastic parts. Hides tool marks, prepares surfaces for coating and gives a premium matte look.
Sand Blasting
Sand blasting for surface cleaning, descaling and roughening. Removes rust, scale, old coating and oxide before welding, painting or bonding.
Polishing
Mechanical polishing to mirror and optical finishes: Ra down to 0.05 µm for mould cavities, light guides, medical parts and decorative surfaces.
Bereit, Ihr {service}-Projekt zu starten?
Senden Sie heute Ihre Dateien — DFM-geprüftes Angebot innerhalb von 24 Stunden.