Was wir tun
PA12 and PA11 with 4–6 % higher tensile consistency than las
PA12 and PA11 with 4–6 % higher tensile consistency than laser sintering
Faster build rate and lower unit cost at volume
Faster build rate and lower unit cost at volume
Fine surface detail and crisp edges from outlining agents
Fine surface detail and crisp edges from outlining agents
Large build volume
Large build volume for batch production
Recycled powder blend options
Recycled powder blend options for sustainability targets
Batch traceability with build reports
Batch traceability with build reports
Materialien
| PA12 nylon |
| PA11 nylon |
| PA12 glass beads |
| TPU flexible |
| Recycled content PA12 |
| Colour-dyed grades |
Wichtigste Spezifikationen
| Spezifikation | Details |
|---|---|
| Layer height | 0.08 mm |
| Tolerance | ±0.3 % with a minimum of ±0.3 mm |
| Build size | 380 × 284 × 380 mm |
| Lead time | 2–4 working days |
| Tensile strength | 48 MPa (PA12, Z orientation) |
| Batch size | up to 1,000+ parts per build |
Oberflächen & Nachbearbeitung
Dyeing in black or custom colour
Dyeing in black or custom colour
Vapour smoothing
Vapour smoothing
Bead blasting and tumbling
Bead blasting and tumbling
Insert installation and assembly
Insert installation and assembly
Häufige Fragen
MJF or SLS for production parts?
MJF generally gives more consistent mechanical properties and a finer surface, which suits end-use parts and cosmetic surfaces. SLS remains competitive for very small batches and offers extra materials such as TPU and alumide.
Can MJF parts be sterilised?
PA12 withstands autoclave cycles and is used for surgical guides and instrument housings. For repeated high-temperature sterilisation we recommend checking our material data sheet.
How consistent is it between batches?
Fusing and detailing agents are jetted in a single pass, so properties vary less across the build volume than laser sintering. We supply build reports on request.
3D Printing capabilities
3D Printing overview
SLA, SLS, MJF & FDM. Nylon, resin, carbon-filled. Parts from 2 days.
SLA 3D Printing
Stereolithography printing at 0.05 mm layers for smooth, high-detail models. Transparent, tough and high-temperature resins, parts shipped in 2 days.
SLS 3D Printing
Selective laser sintering of PA12, PA11, glass-filled nylon and TPU. No support structures, tough functional parts, batch production without tooling.
FDM 3D Printing
Fused deposition modelling for large, economical parts in ABS, ASA, PC, PETG and PEI. Build volumes to 900 x 600 x 800 mm for jigs and enclosures.
DLP 3D Printing
Digital light processing for high-resolution small parts, dental models and micro detail. 0.03 mm layers with optical-grade surface quality.
Bereit, Ihr {service}-Projekt zu starten?
Senden Sie heute Ihre Dateien — DFM-geprüftes Angebot innerhalb von 24 Stunden.