हम क्या करते हैं
Impact strength roughly 200 times that of glass
Impact strength roughly 200 times that of glass
Optical clarity with light transmission around 88 %
Optical clarity with light transmission around 88 %
Useable from −40 °C to +120 °C
Useable from −40 °C to +120 °C
Machines, forms and thermoforms readily
Machines, forms and thermoforms readily
Available optically clear or tinted
Available optically clear or tinted
Takes hard coating
Takes hard coating for scratch resistance
मटेरियल
| Optical grade PC sheet |
| Impact modified PC |
| Glass-filled PC |
| PC/ABS blend |
| PC for CNC machining |
| PC for injection moulding |
मुख्य विनिर्देश
| विनिर्देश | विवरण |
|---|---|
| Tensile strength | 65 MPa |
| Impact strength | Notched Izod 600–850 J/m |
| Heat deflection | 128 °C at 1.82 MPa |
| Light transmission | 88 % |
| Density | 1.20 g/cm³ |
| Scratch resistance | Poor without coating |
सतह फिनिश और पोस्ट-प्रोसेसिंग
Hard coat for scratch resistance
Hard coat for scratch resistance
Anti-reflective coating
Anti-reflective coating
Polished edges
Polished edges
Tinting and dyeing
Tinting and dyeing
अक्सर पूछे जाने वाले प्रश्न
Is polycarbonate suitable for machine guards?
Yes, if the thickness matches the impact risk. PC is the standard material for vision panels because it absorbs impact instead of shattering, and we can hard coat it against scratching.
Can PC be machined without cracking?
Machining stresses can cause crazing, so we use sharp tooling, careful clamping and relieve stress afterwards. Where clarity matters we anneal the part after machining.
PC or PMMA for a clear part?
PC wins on impact, PMMA wins on optical clarity and scratch resistance. For lenses and displays PMMA is often preferred; for guards and covers PC is safer.
More in this section
CNC Machining Materials
Metals and engineering plastics for CNC machining: aluminium, stainless, steel, titanium, brass, copper and high-performance polymers with grade guidance.
Injection Molding Materials
Resins for injection moulding: ABS, PP, PC, PA, POM, PBT, PEEK and glass-filled grades with shrink, temperature and application guidance.
3D Printing Materials
Materials for industrial 3D printing: PA12, PA11, glass-filled nylon, TPU, engineering resins and high-temperature polymers compared by process.
Sheet Metal Materials
Sheet materials for fabrication: cold rolled and galvanised steel, stainless 304/316, aluminium 5052/6061 and copper, with thickness and finish guidance.
Composite Materials
FRP and GRP material options: glass and carbon fibre reinforcements, polyester, vinyl ester and epoxy resins, foam and honeycomb core materials.
अपना {service} प्रोजेक्ट शुरू करने के लिए तैयार हैं?
आज ही अपनी फाइलें भेजें — 24 घंटों में DFM-जांचा कोटेशन।