Tube Laser Cutting
Tube lasers cut three-dimensional geometry on hollow sections and profiles in a single operation, so a mitred, coped and pierced frame tube comes off the machine ready to weld. That removes multiple saws, drill jigs and fixtures from the process chain and shortens frame fabrication dramatically.
फाइलें अपलोड करें — 24 घंटे में कोटेशन DFM समीक्षा का अनुरोध
हम क्या करते हैं
Round tube Ø 12–220 mm and square section up to 200 mm
Round tube Ø 12–220 mm and square section up to 200 mm
Coping, mitre, notch and piercing in one setup
Coping, mitre, notch and piercing in one setup
Profile nesting to reduce offcut waste
Profile nesting to reduce offcut waste
Welded frame kits cut to weld-ready condition
Welded frame kits cut to weld-ready condition
Handrail, chassis, furniture and machine frame work
Handrail, chassis, furniture and machine frame work
Length up to 6,500 mm with automatic loading
Length up to 6,500 mm with automatic loading
मटेरियल
| Mild steel tube and section |
| Stainless 304 and 316 tube |
| Aluminium profiles and tube |
| Galvanised tube |
| Brass and copper tube |
| Specialty alloy section |
मुख्य विनिर्देश
| विनिर्देश | विवरण |
|---|---|
| Tube diameter | Ø 12–220 mm |
| Square section | up to 200 × 200 mm |
| Wall thickness | 0.8–12 mm |
| Cut length | up to 6,500 mm |
| Tolerance | ±0.1 mm on cut features |
| Lead time | 3–5 working days |
सतह फिनिश और पोस्ट-प्रोसेसिंग
Weld preparation and tack assembly
Weld preparation and tack assembly
Powder coating and painting
Powder coating and painting
Zinc plating and galvanising
Zinc plating and galvanising
Brushing and polishing
Brushing and polishing
अक्सर पूछे जाने वाले प्रश्न
Can you also weld the cut tubes?
Yes. We cut to weld-ready condition with matched mitres and then weld, dress and finish the assembly, so you receive a complete frame rather than a kit.
What lengths of tube can you handle?
Up to 6,500 mm in a single pass, which covers virtually all machine frames and structural assemblies. Longer parts are cut in sections with connecting sleeves.
Is tube laser cutting cheaper than sawing and drilling?
For anything with more than two features per tube it usually is, because it eliminates separate operations and the fixtures they need. We quote both routes when volumes are high.
Sheet Metal Fabrication capabilities
Sheet Metal Fabrication overview
Laser cutting, bending, welding, PEM hardware — enclosures & brackets.
Sheet Metal Laser Cutting
Fibre laser cutting of steel, stainless, aluminium and brass up to 20 mm. Burr-free edges from 0.02 mm accuracy, cut and shipped in 3 days.
Sheet Metal Bending
CNC press-brake bending of sheet from 0.5 to 8 mm. 160-ton capacity, bend tolerances to ±0.1 mm, custom tooling for complex profiles.
Welding Services
TIG, MIG, spot and laser welding of steel, stainless and aluminium assemblies. Leak-tight enclosures, cosmetic welds and welded frames.
Metal Stamping
Progressive die and short-run metal stamping for brackets, contacts and clips. Tooling from 10 days, burr-free parts with tight tolerances.
Waterjet Cutting
Abrasive waterjet cutting with no heat-affected zone. Cuts steel to 150 mm, stainless, aluminium, stone and composites without thermal distortion.
अपना {service} प्रोजेक्ट शुरू करने के लिए तैयार हैं?
आज ही अपनी फाइलें भेजें — 24 घंटों में DFM-जांचा कोटेशन।