हम क्या करते हैं
High stiffness and strength in a machinable plastic
High stiffness and strength in a machinable plastic
Low friction and good wear resistance
Low friction and good wear resistance
Excellent dimensional stability and low moisture uptake
Excellent dimensional stability and low moisture uptake
Machines to tight tolerances with a clean finish
Machines to tight tolerances with a clean finish
Resists fuels, solvents and neutral chemicals
Resists fuels, solvents and neutral chemicals
Ideal
Ideal for gears, bushings, cams and wear parts
मटेरियल
| POM-C copolymer |
| POM-H homopolymer Delrin |
| Glass-filled POM |
| PTFE-filled POM for low friction |
| Anti-static POM |
| POM for food contact |
मुख्य विनिर्देश
| विनिर्देश | विवरण |
|---|---|
| Tensile strength | 70 MPa |
| Flexural modulus | 2,800 MPa |
| Coefficient of friction | 0.2–0.35 |
| Heat deflection | 110 °C at 1.82 MPa |
| Water absorption | 0.2 % in 24 h |
| Machinability | Excellent |
सतह फिनिश और पोस्ट-प्रोसेसिंग
Tumbled and deburred edges
Tumbled and deburred edges
Machined to fine surface finish
Machined to fine surface finish
Annealed for stress relief
Annealed for stress relief
Laser marked identification
Laser marked identification
अक्सर पूछे जाने वाले प्रश्न
POM or nylon for gears?
POM is the better gear material because it holds dimensions with changing humidity, whereas nylon absorbs moisture and grows. Nylon suits higher impact and quieter running.
Why anneal POM parts?
Machining leaves internal stress that can cause cracking or dimensional drift. Annealing after roughing and before finishing keeps thin walls and tight bores stable.
Can POM be used in contact with chemicals?
It resists fuels, oils and neutral chemicals but is attacked by strong acids and oxidising agents. Check the specific medium with us before committing.
More in this section
CNC Machining Materials
Metals and engineering plastics for CNC machining: aluminium, stainless, steel, titanium, brass, copper and high-performance polymers with grade guidance.
Injection Molding Materials
Resins for injection moulding: ABS, PP, PC, PA, POM, PBT, PEEK and glass-filled grades with shrink, temperature and application guidance.
3D Printing Materials
Materials for industrial 3D printing: PA12, PA11, glass-filled nylon, TPU, engineering resins and high-temperature polymers compared by process.
Sheet Metal Materials
Sheet materials for fabrication: cold rolled and galvanised steel, stainless 304/316, aluminium 5052/6061 and copper, with thickness and finish guidance.
Composite Materials
FRP and GRP material options: glass and carbon fibre reinforcements, polyester, vinyl ester and epoxy resins, foam and honeycomb core materials.
अपना {service} प्रोजेक्ट शुरू करने के लिए तैयार हैं?
आज ही अपनी फाइलें भेजें — 24 घंटों में DFM-जांचा कोटेशन।