हम क्या करते हैं
Hull sections, transoms and structural panels
Hull sections, transoms and structural panels
Superstructure, deck and cabin components
Superstructure, deck and cabin components
Hatches, covers and access panels
Hatches, covers and access panels
Sandwich construction
Sandwich construction for stiffness and buoyancy
Cored laminates with foam or balsa
Cored laminates with foam or balsa
Stainless and aluminium hardware fabrication
Stainless and aluminium hardware fabrication
मटेरियल
| Glass fibre CSM and woven roving |
| Vinyl ester and epoxy resin |
| PVC foam and balsa cores |
| Gel coats and non-slip additives |
| Stainless 316 hardware |
| Aluminium 5083 plate |
मुख्य विनिर्देश
| विनिर्देश | विवरण |
|---|---|
| Part size | up to 6 m panels |
| Construction | Hand lay-up, infusion, RTM |
| Resin | Vinyl ester and epoxy for salt water |
| Thickness | 3–40 mm with cores |
| Finish | Gel coat, non-slip texture, paint |
| Quantity | 1 piece to 500 per year |
सतह फिनिश और पोस्ट-प्रोसेसिंग
Coloured gel coat with UV stability
Coloured gel coat with UV stability
Moulded non-slip deck texture
Moulded non-slip deck texture
Antifouling and topside paint
Antifouling and topside paint
Polished and buffed surfaces
Polished and buffed surfaces
अक्सर पूछे जाने वाले प्रश्न
Which resin suits marine use best?
Vinyl ester resists water absorption and osmosis better than polyester, and epoxy adds strength and adhesion. For parts below the waterline we default to vinyl ester or epoxy.
Can you build from an existing boat part?
Yes. We take a mould from the existing panel or hull section, including the gel coat colour and any moulded non-slip pattern.
Do you help with class requirements?
We produce laminate schedules to the thickness and reinforcement your classification society or surveyor requires, and supply laminate test coupons where necessary.
More in this section
Automotive
Prototype and low-volume automotive parts: CNC parts, moulded trim, FRP body panels, sheet metal brackets and jigs. PPAP-ready documentation for UK and EU programmes.
Motorsport & Racing
Rapid composite and machined parts for race teams: bodywork, ducts, brackets and lightweight structures delivered in days, not weeks.
Medical Devices
Machined, moulded and 3D printed medical components: surgical instrument parts, housings, fluidic manifolds and device enclosures with traceable documentation.
Aerospace
Precision machined and composite aerospace components: light-weighted brackets, housings, panels and ground support equipment with full traceability.
Electronics
Electronics enclosures, heat sinks, connectors and production fixtures: sheet metal chassis, machined heat sinks and moulded housings with EMC provisions.
अपना {service} प्रोजेक्ट शुरू करने के लिए तैयार हैं?
आज ही अपनी फाइलें भेजें — 24 घंटों में DFM-जांचा कोटेशन।