हम क्या करते हैं
Grades from satin to mirror finish
Grades from satin to mirror finish
Ra values down to 0.05 µm
Ra values down to 0.05 µm
Mould cavity polishing to SPI A1
Mould cavity polishing to SPI A1
Light guide and lens polishing
Light guide and lens polishing
Decorative metal polishing and buffing
Decorative metal polishing and buffing
Edge and corner rounding control
Edge and corner rounding control
मटेरियल
| Tool steel and mould steel |
| Stainless steel |
| Aluminium |
| Brass and copper |
| PMMA and polycarbonate |
| PEEK and POM |
मुख्य विनिर्देश
| विनिर्देश | विवरण |
|---|---|
| Surface finish | Ra 0.05–0.4 µm |
| Grade | SPI A1–A3 achievable |
| Materials | Steel, stainless, aluminium, plastics |
| Methods | Hand, vibratory, diamond paste |
| Size limit | up to 1,000 mm typical |
| Lead time | 3–7 working days |
सतह फिनिश और पोस्ट-प्रोसेसिंग
Bright dip after polishing
Bright dip after polishing
Protective lacquer or oil
Protective lacquer or oil
Anodizing over polished surface
Anodizing over polished surface
अक्सर पूछे जाने वाले प्रश्न
What finish do I need for a mould?
It depends on the part requirement. SPI A1 gives a mirror gloss, A2 is a high gloss, and B grades produce a semi-gloss that hides small defects. We match the cavity finish to the target part appearance.
Why does polishing matter on light guides?
Every surface imperfection scatters light and reduces efficiency, so light guides are polished to optical quality on the faces that must transmit or reflect.
Can polishing remove machining damage?
Yes, but the process has to remove enough material to get below the damaged layer. We start with the appropriate abrasive grade rather than polishing over tool marks.
More in this section
Anodizing
Type II and Type III anodizing for aluminium: clear, black and colour finishes with improved corrosion and wear resistance, thickness from 5 to 50 µm.
Hard Anodizing
Type III hard anodizing builds a 25-50 µm ceramic-like oxide layer with up to 500 HV surface hardness for wear-critical aluminium parts.
Bead Blasting
Glass bead blasting for a uniform satin finish on metal and plastic parts. Hides tool marks, prepares surfaces for coating and gives a premium matte look.
Sand Blasting
Sand blasting for surface cleaning, descaling and roughening. Removes rust, scale, old coating and oxide before welding, painting or bonding.
Powder Coating
Powder coating in RAL and Pantone colours: durable, thick and impact-resistant finish for sheet metal and fabrications, from 60 to 120 µm.
अपना {service} प्रोजेक्ट शुरू करने के लिए तैयार हैं?
आज ही अपनी फाइलें भेजें — 24 घंटों में DFM-जांचा कोटेशन।