O que fazemos
Valve bodies, manifolds and flow components
Valve bodies, manifolds and flow components
Battery module enclosures and cooling plates
Battery module enclosures and cooling plates
Busbars, terminals and power distribution parts
Busbars, terminals and power distribution parts
Heat exchanger tubes and cold plates
Heat exchanger tubes and cold plates
Composite housings and weatherproof covers
Composite housings and weatherproof covers
Sealing and pressure tightness verification
Sealing and pressure tightness verification
Materiais
| Aluminium 6061 and 6082 |
| Stainless 316L and duplex |
| Copper C11000 for busbars |
| Brass and bronze valve alloys |
| Composite and insulation materials |
| Thermally conductive potting compounds |
Especificações principais
| Especificação | Detalhes |
|---|---|
| Tolerance | ±0.01 mm on sealing faces |
| Materials | Aluminium, stainless, copper, composites |
| Pressure | Leak tested per assembly specification |
| Lead time | 5–15 working days |
| Volume | 1–20,000 units |
| Standards | Processes aligned to ISO 9001 |
Acabamentos superficiais e pós-processamento
Hard anodizing for dielectric strength
Hard anodizing for dielectric strength
Electroless nickel for corrosion resistance
Electroless nickel for corrosion resistance
Silver plating on busbars
Silver plating on busbars
Powder coating for enclosures
Powder coating for enclosures
Perguntas frequentes
Can you leak test assemblies?
Yes, by pressure decay or bubble immersion, and we record the result against the serial number. Where needed we add impregnation or redesign the seal groove after analysis.
Do you machine copper busbars?
Yes. Copper is machined in dedicated cells with controlled swarf handling, then silver or tin plated with thickness verification for contact resistance.
Can you support EV battery programmes?
We produce module housings, cold plates and busbar assemblies, and work with your thermal and safety requirements including dielectric coating specifications.
More in this section
Automotive
Prototype and low-volume automotive parts: CNC parts, moulded trim, FRP body panels, sheet metal brackets and jigs. PPAP-ready documentation for UK and EU programmes.
Motorsport & Racing
Rapid composite and machined parts for race teams: bodywork, ducts, brackets and lightweight structures delivered in days, not weeks.
Medical Devices
Machined, moulded and 3D printed medical components: surgical instrument parts, housings, fluidic manifolds and device enclosures with traceable documentation.
Aerospace
Precision machined and composite aerospace components: light-weighted brackets, housings, panels and ground support equipment with full traceability.
Electronics
Electronics enclosures, heat sinks, connectors and production fixtures: sheet metal chassis, machined heat sinks and moulded housings with EMC provisions.
Pronto para começar seu projeto de {service}?
Envie seus arquivos hoje — orçamento com DFM em 24 horas.