O que fazemos
Bar capacity Ø 0.5–32 mm with guide-bushing support
Bar capacity Ø 0.5–32 mm with guide-bushing support
Tolerances to ±0.002 mm on diameters
Tolerances to ±0.002 mm on diameters
Parts with length-to-diameter ratios beyond 10:1
Parts with length-to-diameter ratios beyond 10:1
Cross-drilling, slotting and broaching with live tooling
Cross-drilling, slotting and broaching with live tooling
Pick-off spindle
Pick-off spindle for complete parts in a single cycle
Ideal
Ideal for medical, dental, connector and sensor parts
Materiais
| Stainless 303 / 316L / 17-4 PH |
| Titanium Grade 2, Grade 5 |
| Brass, bronze, copper alloys |
| Medical-grade PEEK and PSU |
| Nitinol and precious alloys on request |
| Carbon steel and free-cutting steel |
Especificações principais
| Especificação | Detalhes |
|---|---|
| Diameter range | Ø 0.5–32 mm |
| Tolerance | ±0.002 mm achievable |
| Length to diameter | up to 30:1 with support |
| Surface finish | Ra 0.2 µm turned |
| Lead time | 5–10 working days |
| Inspection | Optical CMM and 100% vision for critical features |
Acabamentos superficiais e pós-processamento
Passivation for medical parts
Passivation for medical parts
Electropolishing and electroless nickel
Electropolishing and electroless nickel
Gold and silver plating
Gold and silver plating
Ultrasonic cleaning and cleanroom packing
Ultrasonic cleaning and cleanroom packing
Perguntas frequentes
How is Swiss machining different from conventional turning?
Swiss machines support the workpiece right at the cutting point, so very small diameters and very long, slender parts can be produced without deflection. That is why the process dominates medical screws, connector pins and micro fluidic components.
Which quantities make sense?
Swiss machining is economic from a few hundred pieces up to millions because the machines run largely unattended. For single prototypes we would normally use conventional turning.
Can you supply full material certificates?
Yes — mill certificates, RoHS and REACH declarations plus inspection reports are standard with Swiss parts.
Precision CNC Machining capabilities
Precision CNC Machining overview
3/4/5-axis milling & turning, ±0.005 mm, 60+ materials, parts in 3 days.
CNC Milling
3, 4 and 5-axis CNC milling for prototype and production parts. Tolerances to ±0.005 mm, 60+ metals and plastics, machined parts shipped in 3 working days.
CNC Turning
CNC turning with live tooling for shafts, bushings, fittings and threaded parts. Diameters 0.5-400 mm, tolerances to ±0.005 mm, bar-fed production runs.
5-Axis CNC Machining
Simultaneous 5-axis CNC machining for complex geometry, deep cavities and multi-face parts. Undercuts, organic surfaces and lightened structures in one setup.
Wire EDM
Wire electrical discharge machining for hardened tool steel, sharp internal corners and burr-free profiles. Kerf from 0.2 mm, tolerances to ±0.003 mm.
CNC Rapid Prototyping
CNC prototypes in 48 hours from plastic or metal. Functional, dimensionally accurate parts for design reviews, fit checks and investor samples without tooling cost.
Pronto para começar seu projeto de {service}?
Envie seus arquivos hoje — orçamento com DFM em 24 horas.