ما نقوم به
End-effector plates, gripper jaws and tool changers
End-effector plates, gripper jaws and tool changers
Welding, checking and assembly fixtures
Welding, checking and assembly fixtures
Cell guarding frames and machine bases
Cell guarding frames and machine bases
Composite covers and lightweight arm segments
Composite covers and lightweight arm segments
Cable management and drag chain brackets
Cable management and drag chain brackets
Prototype to series production quantities
Prototype to series production quantities
المواد
| Aluminium 6061 and 7075 |
| Steel 1045 and 4140 |
| Stainless 304 and 316 |
| Nylon PA12 and POM |
| Carbon fibre composites |
| TPU pads and grippers |
أهم المواصفات
| المواصفة | التفاصيل |
|---|---|
| Tolerance | ±0.02 mm on fixture locating features |
| Materials | Aluminium, steel, nylon, composite |
| Frame sizes | up to 3,000 × 1,500 mm fabricated |
| Lead time | 3–12 working days |
| Volume | 1–2,000 units per year |
| Finishes | Anodizing, powder coat, black oxide |
تشطيبات السطح والمعالجة اللاحقة
Hard anodizing for wear surfaces
Hard anodizing for wear surfaces
Powder coating of frames
Powder coating of frames
Black oxide on steel
Black oxide on steel
Laser marked part numbers and datum labels
Laser marked part numbers and datum labels
الأسئلة المتكررة
Can you hold repeatability for fixtures?
Yes. Locating features are machined to ±0.02 mm and verified on a CMM, and we recommend dowel-pinned construction so fixtures stay aligned after transport or rebuild.
Do you supply complete cells or parts?
We focus on the mechanical content: frames, guarding, fixtures, end effectors and covers, delivered as parts or as a bolted-together sub-assembly ready for your integrator.
How do you keep weight down on robot arms?
By machining pockets into aluminium parts and switching to composite where stiffness allows. We can benchmark options against your payload and inertia limits.
More in this section
Automotive
Prototype and low-volume automotive parts: CNC parts, moulded trim, FRP body panels, sheet metal brackets and jigs. PPAP-ready documentation for UK and EU programmes.
Motorsport & Racing
Rapid composite and machined parts for race teams: bodywork, ducts, brackets and lightweight structures delivered in days, not weeks.
Medical Devices
Machined, moulded and 3D printed medical components: surgical instrument parts, housings, fluidic manifolds and device enclosures with traceable documentation.
Aerospace
Precision machined and composite aerospace components: light-weighted brackets, housings, panels and ground support equipment with full traceability.
Electronics
Electronics enclosures, heat sinks, connectors and production fixtures: sheet metal chassis, machined heat sinks and moulded housings with EMC provisions.
هل أنت مستعد لبدء مشروع {service}؟
أرسل ملفاتك اليوم — عرض سعر مُراجَع DFM خلال 24 ساعة.