ما نقوم به
Mild steel, galvanised steel and stainless sheet
Mild steel, galvanised steel and stainless sheet
Aluminium grades
Aluminium grades for forming and anodizing
Copper and brass
Copper and brass for electrical and decorative parts
Thickness 0.5 to 20 mm depending on process
Thickness 0.5 to 20 mm depending on process
Pre-coated and patterned sheet options
Pre-coated and patterned sheet options
Bend radius and K-factor guidance per material
Bend radius and K-factor guidance per material
المواد
| Cold rolled steel SPCC |
| Hot rolled and pickled steel |
| Galvanised steel SGCC and DX51D |
| Stainless 304 and 316 |
| Aluminium 5052 and 6061 |
| Copper C1100 and brass C2680 |
أهم المواصفات
| المواصفة | التفاصيل |
|---|---|
| Thickness | 0.5–8 mm formed, to 20 mm laser cut |
| Max sheet | 1,525 × 3,050 mm |
| Steel | SPCC, SPHC, SGCC, DX51D |
| Stainless | 304, 316, 430, 201 |
| Aluminium | 5052, 5083, 6061, 1100 |
| Tolerance | ±0.1 mm formed, ±0.05 mm cut |
تشطيبات السطح والمعالجة اللاحقة
Powder coating and wet paint
Powder coating and wet paint
Zinc and nickel plating
Zinc and nickel plating
Anodizing for aluminium
Anodizing for aluminium
Brushed and bead blasted surfaces
Brushed and bead blasted surfaces
الأسئلة المتكررة
Which stainless grade should I use outdoors?
304 handles most outdoor environments, but for coastal, marine or chemical exposure specify 316 for the molybdenum content that resists chloride pitting.
Does galvanised sheet need painting?
It can be left bare, and paint adheres well if the surface is prepared correctly. For visible parts we normally use cold rolled steel and paint it, because galvanised surface quality varies.
Can you supply material certificates?
Yes, mill certificates are provided for all sheet we source, including the standard, heat number and mechanical properties.
More in this section
CNC Machining Materials
Metals and engineering plastics for CNC machining: aluminium, stainless, steel, titanium, brass, copper and high-performance polymers with grade guidance.
Injection Molding Materials
Resins for injection moulding: ABS, PP, PC, PA, POM, PBT, PEEK and glass-filled grades with shrink, temperature and application guidance.
3D Printing Materials
Materials for industrial 3D printing: PA12, PA11, glass-filled nylon, TPU, engineering resins and high-temperature polymers compared by process.
Composite Materials
FRP and GRP material options: glass and carbon fibre reinforcements, polyester, vinyl ester and epoxy resins, foam and honeycomb core materials.
Aluminium 6061-T6
Aluminium 6061-T6 for CNC machining and fabrication: good strength, excellent corrosion resistance and weldability, the default alloy for most parts.
هل أنت مستعد لبدء مشروع {service}؟
أرسل ملفاتك اليوم — عرض سعر مُراجَع DFM خلال 24 ساعة.