ما نقوم به
Tensile strength around 310 MPa in the T6 temper
Tensile strength around 310 MPa in the T6 temper
Excellent corrosion resistance in most environments
Excellent corrosion resistance in most environments
Anodizes evenly
Anodizes evenly for clear, black and colour finishes
Machines and welds well, including TIG welding
Machines and welds well, including TIG welding
Available in bar, plate and extrusion
Available in bar, plate and extrusion
Suitable
Suitable for brackets, housings, plates and manifolds
المواد
| 6061-T6 plate and bar |
| 6061-T6511 extrusion |
| 6061 sheet for fabrication |
| MIC-6 cast plate for flatness critical work |
| 6061 with hard anodizing for wear surfaces |
أهم المواصفات
| المواصفة | التفاصيل |
|---|---|
| Tensile strength | 310 MPa (T6) |
| Yield strength | 276 MPa |
| Density | 2.70 g/cm³ |
| Machinability | Good, free-cutting at high speed |
| Corrosion | Excellent, anodizing recommended |
| Finishes | Anodizing, powder coat, paint |
تشطيبات السطح والمعالجة اللاحقة
Clear and black anodizing
Clear and black anodizing
Hard anodizing for wear
Hard anodizing for wear
Powder coating
Powder coating
Bead blasting and brushing
Bead blasting and brushing
الأسئلة المتكررة
Is 6061 strong enough for structural parts?
For most brackets, frames and housings yes. Where higher strength is needed, move to 7075 or consider steel, and we will flag the load case in the DFM review.
Can 6061 be welded?
Yes, it welds well with 4043 or 5356 filler, although the heat-affected zone loses some strength in the T6 temper. For welded frames we often specify 5083 instead.
Does anodizing change dimensions?
Type II anodizing adds roughly 5 to 10 µm per surface, and hard anodizing up to 50 µm. For tight bores we machine undersize to compensate and state it on the drawing.
More in this section
CNC Machining Materials
Metals and engineering plastics for CNC machining: aluminium, stainless, steel, titanium, brass, copper and high-performance polymers with grade guidance.
Injection Molding Materials
Resins for injection moulding: ABS, PP, PC, PA, POM, PBT, PEEK and glass-filled grades with shrink, temperature and application guidance.
3D Printing Materials
Materials for industrial 3D printing: PA12, PA11, glass-filled nylon, TPU, engineering resins and high-temperature polymers compared by process.
Sheet Metal Materials
Sheet materials for fabrication: cold rolled and galvanised steel, stainless 304/316, aluminium 5052/6061 and copper, with thickness and finish guidance.
Composite Materials
FRP and GRP material options: glass and carbon fibre reinforcements, polyester, vinyl ester and epoxy resins, foam and honeycomb core materials.
هل أنت مستعد لبدء مشروع {service}؟
أرسل ملفاتك اليوم — عرض سعر مُراجَع DFM خلال 24 ساعة.