ما نقوم به
Layer height from 0.03 mm
Layer height from 0.03 mm
Pixel resolution down to 35 µm
Pixel resolution down to 35 µm for micro features
Fast build times
Fast build times for small batches
Dental, audiology and orthodontic model materials
Dental, audiology and orthodontic model materials
Investment casting patterns with clean burnout
Investment casting patterns with clean burnout
Biocompatible and Class I resin options
Biocompatible and Class I resin options
المواد
| Standard and ABS-like resin |
| Dental model and castable resin |
| Biocompatible Class I resin |
| High-temperature resin |
| Flexible resin |
| Transparent resin |
أهم المواصفات
| المواصفة | التفاصيل |
|---|---|
| Layer height | 0.03–0.1 mm |
| XY resolution | 35–65 µm |
| Build size | 190 × 120 × 200 mm |
| Lead time | 2–3 working days |
| Tolerance | ±0.05 mm on small parts |
| Post-processing | Wash, post-cure, sand, polish |
تشطيبات السطح والمعالجة اللاحقة
Fine sanding to remove layer lines
Fine sanding to remove layer lines
Clear coat and polishing
Clear coat and polishing
Painting and tinting
Painting and tinting
Plating on conductive resin
Plating on conductive resin
الأسئلة المتكررة
DLP or SLA for small parts?
DLP typically wins on parts smaller than 50 mm because the projected pixel grid gives finer XY resolution and each layer exposes in one shot, so the build is quicker. SLA is more economical for larger build volumes.
Is DLP suitable for dental work?
Yes. Dental model, splint, surgical guide and castable resins are widely printed on DLP machines, and we validate the print parameters against the resin supplier data sheet.
How small a feature can you print?
In practice around 0.15 mm, limited by the pixel size and the resin behaviour. We advise on orientation and supports for any part approaching that limit.
3D Printing capabilities
3D Printing overview
SLA, SLS, MJF & FDM. Nylon, resin, carbon-filled. Parts from 2 days.
SLA 3D Printing
Stereolithography printing at 0.05 mm layers for smooth, high-detail models. Transparent, tough and high-temperature resins, parts shipped in 2 days.
SLS 3D Printing
Selective laser sintering of PA12, PA11, glass-filled nylon and TPU. No support structures, tough functional parts, batch production without tooling.
MJF 3D Printing
HP Multi Jet Fusion printing with consistent mechanical properties and fine surface detail. PA12 and PA11 parts with production-grade repeatability.
FDM 3D Printing
Fused deposition modelling for large, economical parts in ABS, ASA, PC, PETG and PEI. Build volumes to 900 x 600 x 800 mm for jigs and enclosures.
هل أنت مستعد لبدء مشروع {service}؟
أرسل ملفاتك اليوم — عرض سعر مُراجَع DFM خلال 24 ساعة.