Metal Stamping
Stamping cuts and forms sheet in a press, which is the fastest and cheapest way to make flat parts once a tool exists. Progressive dies combine several operations in one pass, so a formed and pierced contact comes off the press complete at a few parts per second.
ما نقوم به
Progressive die stamping
Progressive die stamping for high-volume parts
Short-run and compound dies
Short-run and compound dies for pilot quantities
Punching, blanking, forming, drawing and coining
Punching, blanking, forming, drawing and coining
Burr control and deburring
Burr control and deburring for electrical contacts
In-die tapping and insert feeding
In-die tapping and insert feeding
Strip design to minimise scrap
Strip design to minimise scrap
المواد
| Cold rolled steel |
| Stainless 301, 304 and 430 |
| Brass and phosphor bronze |
| Copper for busbars and contacts |
| Aluminium 5052 and 1050 |
| Nickel and nickel-plated strip |
أهم المواصفات
| المواصفة | التفاصيل |
|---|---|
| Thickness | 0.1–6 mm |
| Tolerance | ±0.05 mm, ±0.02 mm on fine blanking |
| Tool lead time | 10–25 days |
| Press capacity | 25–250 t |
| Volume | from 5,000 pcs to millions |
| Materials | Steel, stainless, brass, copper, aluminium |
تشطيبات السطح والمعالجة اللاحقة
Tumbling and vibratory deburring
Tumbling and vibratory deburring
Electroplating tin, nickel or silver
Electroplating tin, nickel or silver
Passivation of stainless
Passivation of stainless
Stress relief annealing
Stress relief annealing
الأسئلة المتكررة
At what volume does stamping beat laser cutting?
Roughly above 5,000 parts for a simple profile, because the tool cost amortises quickly. Below that laser cutting avoids tooling and gets you parts in days instead of weeks.
Do I own the stamping die?
Yes. The tool is built for your part and remains your property. We maintain it in our press shop and can transfer it if you move production.
Can you stamp and then plate?
Yes. We run the stamping in-house and manage plating as a controlled process with thickness and adhesion testing, which matters for contact resistance.
Sheet Metal Fabrication capabilities
Sheet Metal Fabrication overview
Laser cutting, bending, welding, PEM hardware — enclosures & brackets.
Sheet Metal Laser Cutting
Fibre laser cutting of steel, stainless, aluminium and brass up to 20 mm. Burr-free edges from 0.02 mm accuracy, cut and shipped in 3 days.
Tube Laser Cutting
3D tube and profile laser cutting for round, square and rectangular sections. Coping, mitres and holes cut in one pass without secondary drilling.
Sheet Metal Bending
CNC press-brake bending of sheet from 0.5 to 8 mm. 160-ton capacity, bend tolerances to ±0.1 mm, custom tooling for complex profiles.
Welding Services
TIG, MIG, spot and laser welding of steel, stainless and aluminium assemblies. Leak-tight enclosures, cosmetic welds and welded frames.
Waterjet Cutting
Abrasive waterjet cutting with no heat-affected zone. Cuts steel to 150 mm, stainless, aluminium, stone and composites without thermal distortion.
هل أنت مستعد لبدء مشروع {service}؟
أرسل ملفاتك اليوم — عرض سعر مُراجَع DFM خلال 24 ساعة.