O que fazemos
Removes burrs from machining and stamping
Removes burrs from machining and stamping
Consistent edge radius across a batch
Consistent edge radius across a batch
Vibratory, barrel and centrifugal methods
Vibratory, barrel and centrifugal methods
Surface smoothing and polishing compounds
Surface smoothing and polishing compounds
Suitable
Suitable for small and high-quantity parts
Low cost per part in volume
Low cost per part in volume
Materiais
| Machined aluminium and steel |
| Stamped parts and contacts |
| Stainless steel components |
| Brass and copper parts |
| Plastic moulded parts |
Especificações principais
| Especificação | Detalhes |
|---|---|
| Ra improvement | Down to Ra 0.2 µm with polish media |
| Edge radius | 0.05–1.0 mm typical |
| Media | Ceramic, plastic, steel, walnut shell |
| Batch size | from 1 kg to 200 kg |
| Materials | Metals and plastics |
| Lead time | 2–4 working days |
Acabamentos superficiais e pós-processamento
Drag finishing for polished surfaces
Drag finishing for polished surfaces
De-scaled and cleaned after tumbling
De-scaled and cleaned after tumbling
Followed by plating or coating
Followed by plating or coating
Perguntas frequentes
Which process removes burrs fastest?
Centrifugal and high-energy tumbling work fastest, with ceramic media for aggressive deburring. Vibratory tumbling is gentler and better for delicate or thin parts.
Will tumbling round off my edges too much?
It removes a controlled amount, so we run samples and measure the edge radius before committing the batch. Where sharp edges matter we mask or process selectively.
Can tumbling replace hand deburring?
For most parts, yes, and with far better consistency. Cross-holes and complex internal features may still need manual attention, which we handle in a second step.
More in this section
Anodizing
Type II and Type III anodizing for aluminium: clear, black and colour finishes with improved corrosion and wear resistance, thickness from 5 to 50 µm.
Hard Anodizing
Type III hard anodizing builds a 25-50 µm ceramic-like oxide layer with up to 500 HV surface hardness for wear-critical aluminium parts.
Bead Blasting
Glass bead blasting for a uniform satin finish on metal and plastic parts. Hides tool marks, prepares surfaces for coating and gives a premium matte look.
Sand Blasting
Sand blasting for surface cleaning, descaling and roughening. Removes rust, scale, old coating and oxide before welding, painting or bonding.
Polishing
Mechanical polishing to mirror and optical finishes: Ra down to 0.05 µm for mould cavities, light guides, medical parts and decorative surfaces.
Pronto para começar seu projeto de {service}?
Envie seus arquivos hoje — orçamento com DFM em 24 horas.