Precision CNC Machining
CNC Milling
3, 4 and 5-axis CNC milling for prototype and production parts. Tolerances to ±0.005 mm, 60+ metals and plastics, machined parts shipped in 3 working days.
CNC Turning
CNC turning with live tooling for shafts, bushings, fittings and threaded parts. Diameters 0.5-400 mm, tolerances to ±0.005 mm, bar-fed production runs.
5-Axis CNC Machining
Simultaneous 5-axis CNC machining for complex geometry, deep cavities and multi-face parts. Undercuts, organic surfaces and lightened structures in one setup.
Swiss CNC Machining
Swiss-type sliding-headstock turning for micro precision parts. Diameters from 0.5 mm, tolerances to ±0.002 mm, ideal for medical and electronic components.
Wire EDM
Wire electrical discharge machining for hardened tool steel, sharp internal corners and burr-free profiles. Kerf from 0.2 mm, tolerances to ±0.003 mm.
CNC Rapid Prototyping
CNC prototypes in 48 hours from plastic or metal. Functional, dimensionally accurate parts for design reviews, fit checks and investor samples without tooling cost.
Injection Molding
Plastic Injection Molding
Production plastic injection moulding from 100 to 100,000+ parts. Hardened steel multi-cavity tooling, 100+ resins, scientific moulding and full PPAP support.
Low-Volume Injection Molding
Aluminium rapid tooling for 100-5,000 part pilot runs. T1 samples in 7-10 days, production-like parts, and a straight path to steel tooling when volumes grow.
Injection Mold Tooling
Mould design and manufacture in-house: 2-plate, 3-plate, hot runner and stack moulds in P20, H13 and S136 steel. DFM and mould flow analysis on every tool.
Insert Molding
Insert moulding of brass, stainless and threaded inserts, bushings, magnets and metal frames. Load-rated threads and metal-plastic joints without assembly.
Overmolding
Overmoulding and two-shot moulding of soft-grip TPE/TPU over rigid substrates, plus sealing rings and multi-material parts in one production flow.
Sheet Metal Fabrication
Sheet Metal Laser Cutting
Fibre laser cutting of steel, stainless, aluminium and brass up to 20 mm. Burr-free edges from 0.02 mm accuracy, cut and shipped in 3 days.
Tube Laser Cutting
3D tube and profile laser cutting for round, square and rectangular sections. Coping, mitres and holes cut in one pass without secondary drilling.
Sheet Metal Bending
CNC press-brake bending of sheet from 0.5 to 8 mm. 160-ton capacity, bend tolerances to ±0.1 mm, custom tooling for complex profiles.
Welding Services
TIG, MIG, spot and laser welding of steel, stainless and aluminium assemblies. Leak-tight enclosures, cosmetic welds and welded frames.
Metal Stamping
Progressive die and short-run metal stamping for brackets, contacts and clips. Tooling from 10 days, burr-free parts with tight tolerances.
Waterjet Cutting
Abrasive waterjet cutting with no heat-affected zone. Cuts steel to 150 mm, stainless, aluminium, stone and composites without thermal distortion.
Custom Sheet Metal Enclosures
Custom enclosures, chassis and 19-inch rack cases built to drawing. Cutting, forming, welding, painting and PEM hardware in one supply.
3D Printing
SLA 3D Printing
Stereolithography printing at 0.05 mm layers for smooth, high-detail models. Transparent, tough and high-temperature resins, parts shipped in 2 days.
SLS 3D Printing
Selective laser sintering of PA12, PA11, glass-filled nylon and TPU. No support structures, tough functional parts, batch production without tooling.
MJF 3D Printing
HP Multi Jet Fusion printing with consistent mechanical properties and fine surface detail. PA12 and PA11 parts with production-grade repeatability.
FDM 3D Printing
Fused deposition modelling for large, economical parts in ABS, ASA, PC, PETG and PEI. Build volumes to 900 x 600 x 800 mm for jigs and enclosures.
DLP 3D Printing
Digital light processing for high-resolution small parts, dental models and micro detail. 0.03 mm layers with optical-grade surface quality.
Die Casting
Gravity Die Casting
Gravity die casting and permanent mould casting for aluminium and zinc parts. Lower tooling cost than high-pressure, excellent for thicker sections.
Sand Casting
Sand casting for large aluminium, iron and bronze parts. Pattern tooling from 10 days, parts from 1 kg to 500 kg without size limits.
FRP / GRP Composites
Hand Lay-Up FRP
Hand lay-up and spray-up FRP for one-off panels, prototypes and small series. Low tooling cost, glass or carbon fibre, gel-coated finishes.
Vacuum Infusion
Vacuum infusion and RTM Light for consistent, low-void composite parts. Better fibre ratios and repeatability than hand lay-up, for 50-1,000 parts.
Resin Transfer Moulding
RTM and RTM Light for two-sided finished composite parts. Closed mould injection gives tight dimensions and class-A surfaces on both faces.
SMC Compression Moulding
Sheet moulding compound compression moulding for high-volume composite parts. Class-A finish, fast cycles and repeatable dimensions above 1,000 parts.
Cross-process services
Rapid Prototyping
Rapid prototyping across CNC, 3D printing, vacuum casting and sheet metal. Choose the process by function, get parts in 2-7 days with DFM review included.
Assembly Services
Sub-assembly and full product assembly: mechanical fastening, adhesives, ultrasonic welding, wiring, testing and retail-ready packaging.
NPI Solutions
Design review, verification builds, packaging and mass production ramp — the full path from CAD to volume.
Cómo funciona
Subir archivos 3D
Envíe STEP/IGES/DXF — NDA a petición.
DFM + presupuesto en 24 h
Los ingenieros revisan fabricabilidad y precio.
Fabricación
Control de calidad en proceso con fotos en etapas clave.
Inspección y envío
Informe FAI, certificados de materiales, envío DDP.
¿Listo para empezar su proyecto de {service}?
Envíe sus archivos hoy — presupuesto con DFM en 24 horas.