Qué hacemos
Hardening and tempering of tool and carbon steels
Hardening and tempering of tool and carbon steels
Stress relief before and after machining
Stress relief before and after machining
Annealing and normalising
Annealing and normalising
Case hardening and nitriding
Case hardening and nitriding
Hardness verified on every batch
Hardness verified on every batch
Distortion controlled on thin and long parts
Distortion controlled on thin and long parts
Materiales
| Tool steel O1, D2, A2 |
| Carbon steel 1045 and 4140 |
| Stainless steels |
| Alloy steels for nitriding |
| Aluminium for T6 ageing |
Especificaciones clave
| Especificación | Detalles |
|---|---|
| Processes | Hardening, tempering, annealing, nitriding |
| Hardness | up to 62 HRC depending on material |
| Furnace | Controlled atmosphere up to 1,100 °C |
| Verification | Hardness testing per batch |
| Standards | Documented time and temperature cycles |
| Lead time | 4–8 working days |
Acabados superficiales y postprocesado
Stress relieved before final machining
Stress relieved before final machining
Tempered after hardening
Tempered after hardening
Oxide scale removed afterwards
Oxide scale removed afterwards
Preguntas frecuentes
Why stress relieve before finish machining?
Machining leaves residual stress that pulls the part out of tolerance when material is removed. Relieving stress between roughing and finishing keeps the final dimensions stable.
What hardness can you achieve?
Tool steels reach 58 to 62 HRC after hardening and tempering, while case hardening produces a hard surface with a tough core for impact resistance.
How do you control distortion?
By using controlled heating and cooling rates, supporting long parts during the cycle and, where necessary, leaving grinding stock that we remove afterwards.
More in this section
Anodizing
Type II and Type III anodizing for aluminium: clear, black and colour finishes with improved corrosion and wear resistance, thickness from 5 to 50 µm.
Hard Anodizing
Type III hard anodizing builds a 25-50 µm ceramic-like oxide layer with up to 500 HV surface hardness for wear-critical aluminium parts.
Bead Blasting
Glass bead blasting for a uniform satin finish on metal and plastic parts. Hides tool marks, prepares surfaces for coating and gives a premium matte look.
Sand Blasting
Sand blasting for surface cleaning, descaling and roughening. Removes rust, scale, old coating and oxide before welding, painting or bonding.
Polishing
Mechanical polishing to mirror and optical finishes: Ra down to 0.05 µm for mould cavities, light guides, medical parts and decorative surfaces.
¿Listo para empezar su proyecto de {service}?
Envíe sus archivos hoy — presupuesto con DFM en 24 horas.