Qué hacemos
Hard chrome
Hard chrome for wear and abrasion resistance
Gold and silver
Gold and silver for electrical contacts
Tin plating
Tin plating for solderability
Copper
Copper for conductivity and plating base layers
Decorative chrome
Decorative chrome for appearance
Thickness control from 1 to 100 µm
Thickness control from 1 to 100 µm
Materiales
| Copper and brass for contacts |
| Steel for hard chrome |
| Aluminium with zincate pre-treatment |
| Stainless steel |
| Plated plastics |
Especificaciones clave
| Especificación | Detalles |
|---|---|
| Metals | Chrome, gold, silver, tin, copper, nickel |
| Thickness | 1–100 µm depending on metal |
| Materials | Steel, copper, brass, aluminium |
| Adhesion | Verified by bend and tape test |
| Size | up to 1,500 mm |
| Lead time | 4–8 working days |
Acabados superficiales y postprocesado
Bright or matte deposits
Bright or matte deposits
Selective masking
Selective masking
Post-plating passivation
Post-plating passivation
Preguntas frecuentes
Which plating suits electrical contacts?
Gold over nickel for low-resistance, corrosion-free contact surfaces; silver where the highest conductivity is needed but tarnish can be managed; tin for solderable terminations.
What does hard chrome do?
It gives a very hard, low-friction surface that resists abrasion and rebuilds worn shafts. It is applied thicker than decorative chrome and then ground to final size.
Do you mask areas?
Yes, we mask threads, bores and mating faces so plating does not change critical dimensions, and we document the masked zones on the process sheet.
More in this section
Anodizing
Type II and Type III anodizing for aluminium: clear, black and colour finishes with improved corrosion and wear resistance, thickness from 5 to 50 µm.
Hard Anodizing
Type III hard anodizing builds a 25-50 µm ceramic-like oxide layer with up to 500 HV surface hardness for wear-critical aluminium parts.
Bead Blasting
Glass bead blasting for a uniform satin finish on metal and plastic parts. Hides tool marks, prepares surfaces for coating and gives a premium matte look.
Sand Blasting
Sand blasting for surface cleaning, descaling and roughening. Removes rust, scale, old coating and oxide before welding, painting or bonding.
Polishing
Mechanical polishing to mirror and optical finishes: Ra down to 0.05 µm for mould cavities, light guides, medical parts and decorative surfaces.
¿Listo para empezar su proyecto de {service}?
Envíe sus archivos hoy — presupuesto con DFM en 24 horas.