Ce que nous faisons
Thick-gauge forming up to 8 mm sheet
Thick-gauge forming up to 8 mm sheet
Pressure forming
Pressure forming for sharper detail and tighter radii
Aluminium or epoxy tooling
Aluminium or epoxy tooling for 1–2,000 parts
Twin-sheet and bonded assemblies
Twin-sheet and bonded assemblies
Voided or blister packaging trays
Voided or blister packaging trays
In-mould texturing and wood-grain finishes
In-mould texturing and wood-grain finishes
Matériaux
| ABS and ABS/PMMA |
| HIPS and HDPE |
| Polycarbonate |
| PMMA acrylic |
| PETG and PVC |
| Polypropylene |
Spécifications clés
| Spécification | Détails |
|---|---|
| Sheet thickness | 0.5–8 mm |
| Max part size | 2,000 × 1,200 × 700 mm |
| Tool lead time | 5–10 days |
| Tolerance | ±0.5 mm typical |
| Quantity | 1–2,000 pcs per tool |
| Tool life | 1,000–10,000 cycles aluminium |
Finitions de surface & post-traitement
Trimming and CNC edge finishing
Trimming and CNC edge finishing
Painting and lacquer
Painting and lacquer
Screen printing
Screen printing
Flocked interiors for trays
Flocked interiors for trays
Questions fréquentes
Vacuum forming or injection moulding?
Below a few thousand parts vacuum forming almost always wins because the tool is a fraction of the cost. Above that, cycle time and material cost start to favour injection moulding.
How sharp can corners be?
Vacuum forming stretches the sheet over the mould, so feature sharpness is limited by the radius you can draw down. Pressure forming improves definition for near-injection appearance.
Can parts be printed or painted?
Yes. Formed panels accept screen printing, pad printing, painting and in-mould graphics, and we can supply them pre-printed if you provide artwork.
Vacuum Casting capabilities
Prêt à lancer votre projet de {service} ?
Envoyez vos fichiers aujourd'hui — devis vérifié DFM sous 24 heures.