Ce que nous faisons
Colour matched to Pantone, RAL or physical sample
Colour matched to Pantone, RAL or physical sample
Thin films from 25 µm
Thin films from 25 µm for detail retention
Soft-touch and satin textures available
Soft-touch and satin textures available
Primer, colour and clear coat systems
Primer, colour and clear coat systems
Metallic and pearl effects
Metallic and pearl effects
Suitable
Suitable for plastics, metals and composites
Matériaux
| ABS and PC housings |
| Aluminium and steel parts |
| FRP and carbon composite |
| 3D printed parts |
| Vacuum cast urethane parts |
Spécifications clés
| Spécification | Détails |
|---|---|
| Thickness | 25–60 µm per coat |
| Gloss | Matte to high gloss |
| Colour | Pantone and RAL matching |
| Cure | Air dry or low-bake |
| Substrates | Plastics, metal, composite |
| Lead time | 3–7 working days |
Finitions de surface & post-traitement
Soft-touch coating
Soft-touch coating
Clear coat protection
Clear coat protection
Texture additives
Texture additives
Two-tone and masked areas
Two-tone and masked areas
Questions fréquentes
How accurate is colour matching?
We spray sample panels for your approval before the batch, which is the only reliable way to account for substrate colour and gloss level.
Can printed parts be painted?
Yes, and it is common: printed parts are sanded, primed and painted so a prototype closely resembles the moulded production part.
What is soft-touch coating?
A paint that leaves a rubberised, low-gloss feel, widely used on consumer electronics and tool grips. It wears over time, so we recommend it only where the feel justifies the wear.
More in this section
Anodizing
Type II and Type III anodizing for aluminium: clear, black and colour finishes with improved corrosion and wear resistance, thickness from 5 to 50 µm.
Hard Anodizing
Type III hard anodizing builds a 25-50 µm ceramic-like oxide layer with up to 500 HV surface hardness for wear-critical aluminium parts.
Bead Blasting
Glass bead blasting for a uniform satin finish on metal and plastic parts. Hides tool marks, prepares surfaces for coating and gives a premium matte look.
Sand Blasting
Sand blasting for surface cleaning, descaling and roughening. Removes rust, scale, old coating and oxide before welding, painting or bonding.
Polishing
Mechanical polishing to mirror and optical finishes: Ra down to 0.05 µm for mould cavities, light guides, medical parts and decorative surfaces.
Prêt à lancer votre projet de {service} ?
Envoyez vos fichiers aujourd'hui — devis vérifié DFM sous 24 heures.