Colour matched to Pantone, RAL or physical sample
Thin films from 25 µm for detail retention
Soft-touch and satin textures available
Primer, colour and clear coat systems
Metallic and pearl effects
Suitable for plastics, metals and composites
| ABS and PC housings |
| Aluminium and steel parts |
| FRP and carbon composite |
| 3D printed parts |
| Vacuum cast urethane parts |
| Specification | Details |
|---|---|
| Thickness | 25–60 µm per coat |
| Gloss | Matte to high gloss |
| Colour | Pantone and RAL matching |
| Cure | Air dry or low-bake |
| Substrates | Plastics, metal, composite |
| Lead time | 3–7 working days |
Soft-touch coating
Clear coat protection
Texture additives
Two-tone and masked areas
We spray sample panels for your approval before the batch, which is the only reliable way to account for substrate colour and gloss level.
Yes, and it is common: printed parts are sanded, primed and painted so a prototype closely resembles the moulded production part.
A paint that leaves a rubberised, low-gloss feel, widely used on consumer electronics and tool grips. It wears over time, so we recommend it only where the feel justifies the wear.
Type II and Type III anodizing for aluminium: clear, black and colour finishes with improved corrosion and wear resistance, thickness from 5 to 50 µm.
Type III hard anodizing builds a 25-50 µm ceramic-like oxide layer with up to 500 HV surface hardness for wear-critical aluminium parts.
Glass bead blasting for a uniform satin finish on metal and plastic parts. Hides tool marks, prepares surfaces for coating and gives a premium matte look.
Sand blasting for surface cleaning, descaling and roughening. Removes rust, scale, old coating and oxide before welding, painting or bonding.
Mechanical polishing to mirror and optical finishes: Ra down to 0.05 µm for mould cavities, light guides, medical parts and decorative surfaces.
Send your files today — DFM-checked quotation within 24 hours.