対応内容
Fine to coarse grain options
Fine to coarse grain options
Consistent directional lines
Consistent directional lines
Hides fingerprints and light scratches
Hides fingerprints and light scratches
Prepared
Prepared for anodizing or clear coat
Applied to flat and curved surfaces
Applied to flat and curved surfaces
Matches existing grain on supplied samples
Matches existing grain on supplied samples
材料
| Stainless 304 and 316 |
| Aluminium sheet and plate |
| Brass and copper |
| Steel with clear coat |
| Pre-anodized aluminium |
主要仕様
| 項目 | 詳細 |
|---|---|
| Grain | 180–400 grit equivalent |
| Materials | Stainless, aluminium, brass |
| Ra | 0.4–1.0 µm |
| Direction | Defined per drawing |
| Size | up to 2,000 mm |
| Lead time | 3–5 working days |
表面処理・後加工
Clear lacquer protection
Clear lacquer protection
Anodizing over brushed surface
Anodizing over brushed surface
No.4 and No.8 finish equivalents
No.4 and No.8 finish equivalents
よくあるご質問
Does grain direction matter?
It matters visually and functionally: grain must run consistently across adjacent panels, and on parts that slide, the brushing direction affects friction. We state the direction on the drawing.
Can brushed surfaces be anodized?
Yes, and the combination is very common on aluminium. The brushing shows through the anodic layer, producing a satin metal look that resists corrosion.
Can you match my existing finish?
Send a sample and we will match grain size and direction. Matching precisely across different suppliers is difficult, so we approve a sample before the batch.
More in this section
Anodizing
Type II and Type III anodizing for aluminium: clear, black and colour finishes with improved corrosion and wear resistance, thickness from 5 to 50 µm.
Hard Anodizing
Type III hard anodizing builds a 25-50 µm ceramic-like oxide layer with up to 500 HV surface hardness for wear-critical aluminium parts.
Bead Blasting
Glass bead blasting for a uniform satin finish on metal and plastic parts. Hides tool marks, prepares surfaces for coating and gives a premium matte look.
Sand Blasting
Sand blasting for surface cleaning, descaling and roughening. Removes rust, scale, old coating and oxide before welding, painting or bonding.
Polishing
Mechanical polishing to mirror and optical finishes: Ra down to 0.05 µm for mould cavities, light guides, medical parts and decorative surfaces.