対応内容
Cutting capacity to 20 mm mild steel and 12 mm aluminium
Cutting capacity to 20 mm mild steel and 12 mm aluminium
Positioning accuracy ±0.02 mm, repeatability ±0.01 mm
Positioning accuracy ±0.02 mm, repeatability ±0.01 mm
Nesting optimisation to cut material waste
Nesting optimisation to cut material waste
Ideal
Ideal for prototype outlines and low-volume runs without tooling
Nitrogen cutting
Nitrogen cutting for oxide-free stainless and aluminium edges
Laser-etched part numbers and bend lines
Laser-etched part numbers and bend lines
材料
| Mild steel CRS and HRS |
| Stainless 304, 316 and 430 |
| Aluminium 5052, 5083 and 6061 |
| Galvanised and zinc-coated steel |
| Brass and copper |
| Spring steel 65Mn |
主要仕様
| 項目 | 詳細 |
|---|---|
| Max sheet | 1,525 × 3,050 mm |
| Mild steel | up to 20 mm |
| Stainless | up to 16 mm |
| Aluminium | up to 12 mm |
| Tolerance | ±0.05 mm profile, ±0.02 mm positioning |
| Lead time | 3 working days |
表面処理・後加工
Deburring and edge smoothing
Deburring and edge smoothing
Powder coating and painting
Powder coating and painting
Zinc and nickel plating
Zinc and nickel plating
Brushed or bead-blasted surface
Brushed or bead-blasted surface
よくあるご質問
What file format should I send?
A DXF of the flat pattern is ideal, ideally accompanied by the 3D model so we can verify bend deductions. We can also unfold native SolidWorks or Inventor sheet metal parts for you.
How close can holes be to a bend?
As a starting point keep hole edges at least the material thickness plus the bend radius away from the bend line. Closer features can distort, and we flag them during DFM review.
Can you cut pre-painted sheet?
Yes, with a suitable laser film or a protective coating applied first. We usually advise cutting bare and painting after for the best edge quality.
Sheet Metal Fabrication capabilities
Sheet Metal Fabrication overview
Laser cutting, bending, welding, PEM hardware — enclosures & brackets.
Tube Laser Cutting
3D tube and profile laser cutting for round, square and rectangular sections. Coping, mitres and holes cut in one pass without secondary drilling.
Sheet Metal Bending
CNC press-brake bending of sheet from 0.5 to 8 mm. 160-ton capacity, bend tolerances to ±0.1 mm, custom tooling for complex profiles.
Welding Services
TIG, MIG, spot and laser welding of steel, stainless and aluminium assemblies. Leak-tight enclosures, cosmetic welds and welded frames.
Metal Stamping
Progressive die and short-run metal stamping for brackets, contacts and clips. Tooling from 10 days, burr-free parts with tight tolerances.
Waterjet Cutting
Abrasive waterjet cutting with no heat-affected zone. Cuts steel to 150 mm, stainless, aluminium, stone and composites without thermal distortion.