対応内容
Thickness 60 to 120 µm in a single coat
Thickness 60 to 120 µm in a single coat
Full RAL and Pantone colour range
Full RAL and Pantone colour range
Textured, matte, satin and gloss options
Textured, matte, satin and gloss options
Excellent impact and chemical resistance
Excellent impact and chemical resistance
Available
Available for large fabricated frames
Metallic and special effect powders
Metallic and special effect powders
材料
| Cold rolled steel |
| Galvanised steel |
| Aluminium |
| Stainless steel |
| Zinc plated parts |
| Fabricated weldments |
主要仕様
| 項目 | 詳細 |
|---|---|
| Thickness | 60–120 µm |
| Colours | RAL and Pantone matched |
| Gloss | Matte, satin, gloss (20–90 GU) |
| Cure | 180–200 °C for 10–15 min |
| Size | up to 2,500 mm parts |
| Lead time | 4–7 working days |
表面処理・後加工
Pre-treatment phosphate or chromate
Pre-treatment phosphate or chromate
Primer for galvanised surfaces
Primer for galvanised surfaces
Texture and wrinkle effects
Texture and wrinkle effects
よくあるご質問
Powder coat or wet paint?
Powder is tougher, thicker and more chip resistant, so it suits frames, enclosures and anything handled roughly. Wet paint gives better thin-film finish and colour matching for cosmetic parts.
Can powder coat cover weld imperfections?
It hides very little. Weld spatter and grinding marks telegraph through, so weld dressing before coating is essential for visible surfaces.
Will powder coat survive outdoors?
Yes. With a UV-stable powder it withstands several years of exterior exposure, though colour shift can occur over long periods in strong sun.
More in this section
Anodizing
Type II and Type III anodizing for aluminium: clear, black and colour finishes with improved corrosion and wear resistance, thickness from 5 to 50 µm.
Hard Anodizing
Type III hard anodizing builds a 25-50 µm ceramic-like oxide layer with up to 500 HV surface hardness for wear-critical aluminium parts.
Bead Blasting
Glass bead blasting for a uniform satin finish on metal and plastic parts. Hides tool marks, prepares surfaces for coating and gives a premium matte look.
Sand Blasting
Sand blasting for surface cleaning, descaling and roughening. Removes rust, scale, old coating and oxide before welding, painting or bonding.
Polishing
Mechanical polishing to mirror and optical finishes: Ra down to 0.05 µm for mould cavities, light guides, medical parts and decorative surfaces.