Hard chrome for wear and abrasion resistance
Gold and silver for electrical contacts
Tin plating for solderability
Copper for conductivity and plating base layers
Decorative chrome for appearance
Thickness control from 1 to 100 µm
| Copper and brass for contacts |
| Steel for hard chrome |
| Aluminium with zincate pre-treatment |
| Stainless steel |
| Plated plastics |
| Specification | Details |
|---|---|
| Metals | Chrome, gold, silver, tin, copper, nickel |
| Thickness | 1–100 µm depending on metal |
| Materials | Steel, copper, brass, aluminium |
| Adhesion | Verified by bend and tape test |
| Size | up to 1,500 mm |
| Lead time | 4–8 working days |
Bright or matte deposits
Selective masking
Post-plating passivation
Gold over nickel for low-resistance, corrosion-free contact surfaces; silver where the highest conductivity is needed but tarnish can be managed; tin for solderable terminations.
It gives a very hard, low-friction surface that resists abrasion and rebuilds worn shafts. It is applied thicker than decorative chrome and then ground to final size.
Yes, we mask threads, bores and mating faces so plating does not change critical dimensions, and we document the masked zones on the process sheet.
Type II and Type III anodizing for aluminium: clear, black and colour finishes with improved corrosion and wear resistance, thickness from 5 to 50 µm.
Type III hard anodizing builds a 25-50 µm ceramic-like oxide layer with up to 500 HV surface hardness for wear-critical aluminium parts.
Glass bead blasting for a uniform satin finish on metal and plastic parts. Hides tool marks, prepares surfaces for coating and gives a premium matte look.
Sand blasting for surface cleaning, descaling and roughening. Removes rust, scale, old coating and oxide before welding, painting or bonding.
Mechanical polishing to mirror and optical finishes: Ra down to 0.05 µm for mould cavities, light guides, medical parts and decorative surfaces.
Send your files today — DFM-checked quotation within 24 hours.