Cutting capacity to 20 mm mild steel and 12 mm aluminium
Positioning accuracy ±0.02 mm, repeatability ±0.01 mm
Nesting optimisation to cut material waste
Ideal for prototype outlines and low-volume runs without tooling
Nitrogen cutting for oxide-free stainless and aluminium edges
Laser-etched part numbers and bend lines
| Mild steel CRS and HRS |
| Stainless 304, 316 and 430 |
| Aluminium 5052, 5083 and 6061 |
| Galvanised and zinc-coated steel |
| Brass and copper |
| Spring steel 65Mn |
| Specification | Details |
|---|---|
| Max sheet | 1,525 × 3,050 mm |
| Mild steel | up to 20 mm |
| Stainless | up to 16 mm |
| Aluminium | up to 12 mm |
| Tolerance | ±0.05 mm profile, ±0.02 mm positioning |
| Lead time | 3 working days |
Deburring and edge smoothing
Powder coating and painting
Zinc and nickel plating
Brushed or bead-blasted surface
A DXF of the flat pattern is ideal, ideally accompanied by the 3D model so we can verify bend deductions. We can also unfold native SolidWorks or Inventor sheet metal parts for you.
As a starting point keep hole edges at least the material thickness plus the bend radius away from the bend line. Closer features can distort, and we flag them during DFM review.
Yes, with a suitable laser film or a protective coating applied first. We usually advise cutting bare and painting after for the best edge quality.
Laser cutting, bending, welding, PEM hardware — enclosures & brackets.
3D tube and profile laser cutting for round, square and rectangular sections. Coping, mitres and holes cut in one pass without secondary drilling.
CNC press-brake bending of sheet from 0.5 to 8 mm. 160-ton capacity, bend tolerances to ±0.1 mm, custom tooling for complex profiles.
TIG, MIG, spot and laser welding of steel, stainless and aluminium assemblies. Leak-tight enclosures, cosmetic welds and welded frames.
Progressive die and short-run metal stamping for brackets, contacts and clips. Tooling from 10 days, burr-free parts with tight tolerances.
Abrasive waterjet cutting with no heat-affected zone. Cuts steel to 150 mm, stainless, aluminium, stone and composites without thermal distortion.
Send your files today — DFM-checked quotation within 24 hours.