Most medical device assembly lines stall on tooling before they stall on parts. SkillsProto machines jigs, fixtures and inspection tooling with critical locating features at ±0.005 mm and general features at ±0.05 mm, from 1 piece in 3-7 working days, with 48-hour expedite. Printed nests and soft jaws arrive in 2-4 days. Every order ships with a FAI report, CMM data on request and traceable material certificates, quoted with DFM feedback within 24 working hours.

Why Tooling Is Treated Like a Controlled Part in Medical Device Work
In a medical device workshop, a fixture is not a workshop convenience — it is part of the evidence chain. If a locating pin sits 0.1 mm off its nominal position, every housing checked on that fixture inherits the error, and a full batch can be quarantined on a paperwork problem rather than a product problem. SkillsProto therefore manufactures tooling to the same tolerance discipline as product parts: ±0.005 mm on critical locating features, ±0.05 mm on general geometry.
This discipline shows up in three places. First, datums: SkillsProto machines fixture datums in one setup wherever possible, so a 3-axis or 5-axis part carries its locating features through a single clamping, reducing stacking error to fractions of the ±0.005 mm band. Second, documentation: a FAI report accompanies every order, CMM data can be requested for any dimension on the drawing, and material certificates remain traceable. Third, change control: because SkillsProto works from MOQ 1, a revised fixture revision B is a new order, not a negotiation — iteration costs hours, not weeks.
Choosing the Process: Machined, Printed, Cast or Sheet Metal
No single process covers all medical device tooling. A rigid assembly press fixture wants machined aluminium; a delicate nest that must not mark a polished housing wants printed polymer; a pallet that indexes down a conveyor wants sheet metal. SkillsProto maps requirements to processes against 4 criteria: stiffness, marking risk, revision speed and quantity.
| Tooling requirement | Best-fit process | SkillsProto lead time | Typical quantity |
|---|---|---|---|
| Rigid assembly or press fixture with locating pins | CNC machined aluminium | 3-7 working days, 48 h expedite | 1-5 pieces |
| nests, soft jaws, tray inserts for delicate parts | 3D printing | 2-4 days | 1-50 pieces |
| 10-500 repeat nests for pilot lines before tooling | Vacuum casting | 10-500 units | 10-500 units |
| Pallets, brackets, guards and index plates | Sheet metal fabrication | 3-7 working days | 1-50 pieces |
The decision usually turns on two numbers. If a feature must hold ±0.005 mm, it must be machined; printing and casting cannot certify that band on a locating surface. If a nest geometry is still moving weekly, a 2-4 day printed revision beats any metal option — SkillsProto advises machining the interface features and printing the sacrificial geometry, so one machined base serves 3-5 printed nest revisions.
Tolerances and Datum Strategy That Survive an Audit
Fixture tolerances should be set by the tolerance of the part being held, not by the machine's brochure. SkillsProto applies a 4:1 rule as a starting point: if the medical device feature being located is ±0.02 mm, the fixture datum that touches it is targeted at ±0.005 mm, and supporting geometry is opened to ±0.05 mm to keep cost proportionate. Opening every dimension to the tightest band on a 30-feature fixture can double machining time for no measurable gain in the final assembly.
Three practices keep a fixture auditable. One: critical locating features are machined in a single setup, so their mutual positions do not accumulate error across re-clamps. Two: SkillsProto engraves revision and part identification on the fixture body, so revision B can never be mistaken for revision A on the line. Three: CMM data is available for any dimension on request, and the FAI report shipped with every order records the as-measured values, so the fixture file matches the metal on the bench.
Material Selection Without Overreach
Fixture materials for medical device work are chosen for stiffness, stability and marking behaviour — not for product contact. SkillsProto works from a short, well-understood list, and every material ships with traceable certificates.
| Material | Typical tooling use | Property that drives the choice |
|---|---|---|
| 6061-T6 aluminium | Fixture bodies, base plates, vise jaws | Good stiffness-to-weight, machines to ±0.005 mm, 3-7 days |
| 304 stainless steel | Wash-down area tooling, wear pins | Corrosion resistance in cleaning areas |
| Engineering polymers (printed) | Nests, soft jaws, dunnage | 2-4 day revisions, will not mark housings |
| Sheet aluminium or stainless | Pallets, brackets, line guards | Fast forming, low cost at 1-50 pieces |
A caution SkillsProto gives every medical device client: a fixture is not a cleanroom product. If tooling will operate near controlled zones, the customer specifies surface and cleaning requirements, and SkillsProto executes the finishing process — but process capability is not a validation claim. SkillsProto does not issue certifications of cleanliness or suitability for any regulated environment; that evidence belongs to the customer's quality system.
Documentation: What Ships With the Metal
Medical device teams rarely need a fixture alone — they need the fixture plus the paperwork that lets it enter a controlled process. SkillsProto's standard package covers the 3 documents that carry most of that weight, and it does so on every order regardless of quantity, including a single MOQ 1 piece.
| Document | What it records | Availability at SkillsProto |
|---|---|---|
| FAI report | As-measured values against the drawing, first article by first article | Standard with every order |
| CMM data | Dimensional inspection of requested features | On request |
| Material certificates | Traceable material origin per lot | Standard with every order |
Two boundaries keep this package honest. SkillsProto does not claim medical certifications such as ISO 13485, and it does not issue biocompatibility, sterilization or clinical statements. What SkillsProto commits to is process evidence: FAI, CMM and traceable material certificates that a customer's own quality team can fold into their validation file. Where a request crosses into regulatory territory, SkillsProto says so in the DFM feedback that accompanies every quote within 24 working hours.
Iteration Rhythm: From First Nest to Pilot Line
Medical device programs move through tooling generations fast, and the lead times matter more at revision speed than at first delivery. A typical SkillsProto rhythm looks like this: a printed nest iteration lands in 2-4 days; a machined aluminium fixture revision lands in 3-7 working days with 48-hour expedite available; a vacuum-cast run of 10-500 repeat nests supports pilot assembly without committing to injection tooling. Injection molding sits at the end of that ladder — an aluminum tool in 7-10 days when nest volumes justify it, a steel tool in 15-25 days for stable, long-run geometry.
Shipping logistics hold the same discipline. SkillsProto ships DDP to the US, UK and EU in 3-5 days after production, so a UK assembly line can move from a revised drawing to a fixture on the bench in roughly 2 weeks at the slow end, and under 1 week when a printed revision plus expedited dispatch lines up. Quotes with DFM feedback return within 24 working hours, which keeps revision loops measured in days rather than weeks.
Frequently Asked Questions
What tolerances can SkillsProto hold on medical device fixtures?
SkillsProto holds ±0.005 mm on critical locating features and ±0.05 mm on general fixture geometry. Critical features are machined in a single setup wherever the design allows, so their mutual positions do not accumulate re-clamping error, and CMM data is available on request for any dimension.
What is the minimum order for a one-off inspection fixture?
SkillsProto accepts MOQ 1. A single GO/NO-GO inspection fixture is a standard order, not a special case, and it ships with the same FAI report and traceable material certificates as a 100-piece run.
How fast can a nest be revised after a design change?
A printed nest revision typically arrives in 2-4 days and a machined fixture revision in 3-7 working days, with 48-hour expedite available. Because SkillsProto quotes with DFM feedback within 24 working hours, most revision loops close inside 1 week.
Does SkillsProto claim ISO 13485 or other medical certifications?
No. SkillsProto is a prototyping and low-volume manufacturing partner and does not claim medical certifications. The process evidence SkillsProto provides — FAI reports, CMM data and traceable material certificates — is designed to support the customer's own quality system, not to replace it.
Can fixture materials that touch the product be supplied?
SkillsProto machines and prints the contact features to the specified geometry and supplies traceable material certificates. SkillsProto does not make biocompatibility, sterilization or cleanliness claims — contact-critical material selection and any validation of it belong to the customer's regulatory process.
Can SkillsProto ship tooling DDP to the UK and EU?
Yes. SkillsProto ships DDP to the US, UK and EU with 3-5 day delivery after production, so fixture lead times can be planned end to end: 2-4 days for printed revisions, 3-7 working days for machined tooling, plus 3-5 days in transit.
Related capabilities
Related guides
Have parts to quote?
Upload your files — DFM-checked quotation within 24 hours.
