Plastic Injection Molding
Injection moulding presses molten polymer into a machined cavity where it cools into a finished part. Once the tool exists the cost per part collapses, which is why it takes over from machining and casting somewhere between a few hundred and a few thousand units depending on part size.
我们做什么
Tonnage 30–500 t with 1–32 cavities
Tonnage 30–500 t with 1–32 cavities
Hot runner and valve-gate systems
Hot runner and valve-gate systems for engineering resins
Scientific moulding with recorded process windows
Scientific moulding with recorded process windows
Decoupled moulding
Decoupled moulding for tight cosmetic and dimensional control
In-mould labelling, insert loading and automated part remova
In-mould labelling, insert loading and automated part removal
Full PPAP, FAI and capability studies on request
Full PPAP, FAI and capability studies on request
材料
| ABS, PP, PE, PS, PVC |
| PC, PA6/PA66, POM, PMMA, PBT, PET |
| PC/ABS and TPE/TPU |
| PEEK, PEI Ultem, PPS, PPSU |
| Glass-filled PA and PBT |
| Medical USP Class VI and ISO 10993 grades |
关键规格
| 项目 | 参数 |
|---|---|
| Tonnage | 30–500 t |
| Part weight | 0.1 g – 3 kg |
| Tolerance | ISO 2768-c, ±0.05 mm typical |
| Tool life | Aluminium ~5,000 shots, steel 100,000–1,000,000+ |
| Cycle time | 15 s – 3 min depending on wall thickness |
| Resins | 100+ grades including glass-filled and medical |
表面处理与后加工
SPI A1–D3 mould finishes
SPI A1–D3 mould finishes
VDI and MT texture
VDI and MT texture
Colour matching to Pantone or RAL
Colour matching to Pantone or RAL
Pad printing, silk screen, laser marking
Pad printing, silk screen, laser marking
常见问题解答
At what quantity does injection moulding pay off?
As a rough rule, moulding beats machining above 500–1,000 parts per year for small components and above 2,000 for larger housings. We model the crossover against your actual volumes in the quote.
Do you provide mould flow analysis?
Yes. Moldex3D flow, cool and warp analysis is standard on production tools so fill balance, weld lines and warpage are corrected in the design rather than at T1.
Who owns the mould?
You do. Moulds are custom built for your part, and we can store, maintain and if required ship the tool to another moulder on request.
Injection Molding capabilities
Injection Molding overview
Rapid aluminum & production steel tooling, T1 samples in 7–15 days.
Low-Volume Injection Molding
Aluminium rapid tooling for 100-5,000 part pilot runs. T1 samples in 7-10 days, production-like parts, and a straight path to steel tooling when volumes grow.
Injection Mold Tooling
Mould design and manufacture in-house: 2-plate, 3-plate, hot runner and stack moulds in P20, H13 and S136 steel. DFM and mould flow analysis on every tool.
Insert Molding
Insert moulding of brass, stainless and threaded inserts, bushings, magnets and metal frames. Load-rated threads and metal-plastic joints without assembly.
Overmolding
Overmoulding and two-shot moulding of soft-grip TPE/TPU over rigid substrates, plus sealing rings and multi-material parts in one production flow.