An enclosure is an assembly project rather than a single part: it involves cut panels, formed returns, welded or riveted frames, hardware, sealing, finishing and often screening or ventilation. We build the whole unit, so the tolerances between mating parts and the finish consistency are managed by one supplier.
Rack cases, chassis, control boxes and kiosk housings
Sealed enclosures rated to IP54 and above
EMC gasketing and screening provisions
Ventilation louvres, fans and filter plates
PEM hardware, hinges, latches and handles fitted
Complete finishing and silkscreen graphics
| Mild steel CRS |
| Stainless 304 and 316 |
| Aluminium 5052 and 6061 |
| Galvanised steel |
| Pre-coated steel |
| Copper for screening |
| Specification | Details |
|---|---|
| Sheet thickness | 0.8–5 mm |
| Enclosure size | up to 1,500 × 800 × 600 mm |
| Tolerance | ±0.2 mm on assembly interfaces |
| Sealing | IP54 to IP66 with gaskets |
| Finish | Powder coat RAL, wet paint or anodizing |
| Lead time | 7–15 working days |
Powder coating in RAL colours
Wet paint with texture
Anodizing for aluminium
Silkscreen and laser marking
Zinc plating and e-coating
Yes. Send the PCB outline, connector positions and mounting constraints and we will produce a 3D enclosure design plus a costed quote for review before cutting metal.
We add conductive gaskets, screened seams, filtered connectors and ground studs as required, and work to your test house feedback if the first article needs adjustments.
Both. Some customers want a finished unit with hardware and paint, others want flat panels for local assembly, and pricing reflects the operations you choose.
Laser cutting, bending, welding, PEM hardware — enclosures & brackets.
Fibre laser cutting of steel, stainless, aluminium and brass up to 20 mm. Burr-free edges from 0.02 mm accuracy, cut and shipped in 3 days.
3D tube and profile laser cutting for round, square and rectangular sections. Coping, mitres and holes cut in one pass without secondary drilling.
CNC press-brake bending of sheet from 0.5 to 8 mm. 160-ton capacity, bend tolerances to ±0.1 mm, custom tooling for complex profiles.
TIG, MIG, spot and laser welding of steel, stainless and aluminium assemblies. Leak-tight enclosures, cosmetic welds and welded frames.
Progressive die and short-run metal stamping for brackets, contacts and clips. Tooling from 10 days, burr-free parts with tight tolerances.
Send your files today — DFM-checked quotation within 24 hours.