Press braking folds sheet around a punch and die to form flanges, channels, boxes and enclosures. Air bending with CNC backgauges lets us hold angle and flange tolerance without dedicated tooling, so a prototype enclosure and a production batch run on the same machine with the same accuracy.
Press brake capacity 160 t, 3,200 mm bed length
Air bending, coin bending and bottoming
Backgauge accuracy ±0.05 mm for flange position
Custom punches and dies for special profiles
Z-bends, hems, joggles and closed box sections
Bend simulation to validate flat pattern before cutting
| Mild steel CRS and HRS |
| Stainless 304 and 316 |
| Aluminium 5052 and 6061 |
| Galvanised steel |
| Copper and brass |
| Spring steel |
| Specification | Details |
|---|---|
| Thickness | 0.5–8 mm |
| Bed length | 3,200 mm |
| Flange tolerance | ±0.1 mm typical |
| Angle tolerance | ±0.5° |
| Min flange | 4 × material thickness |
| Lead time | 3–5 working days |
Powder coating and wet paint
Anodizing for aluminium
Zinc plating and galvanising
Bead blasting and brushing
Use an inside radius equal to or greater than the material thickness, and always match the radius to a tool you know exists. Too small a radius causes cracking, especially in aluminium and high-strength steel.
We unfold from the 3D model using K-factor tables tuned to our tooling, then verify the flat pattern against the bend deductions. You can also supply a DXF and we will confirm the allowance.
We use CNC crowning and angle measurement with in-process correction, plus first-article inspection on a granite surface plate for critical flange dimensions.
Laser cutting, bending, welding, PEM hardware — enclosures & brackets.
Fibre laser cutting of steel, stainless, aluminium and brass up to 20 mm. Burr-free edges from 0.02 mm accuracy, cut and shipped in 3 days.
3D tube and profile laser cutting for round, square and rectangular sections. Coping, mitres and holes cut in one pass without secondary drilling.
TIG, MIG, spot and laser welding of steel, stainless and aluminium assemblies. Leak-tight enclosures, cosmetic welds and welded frames.
Progressive die and short-run metal stamping for brackets, contacts and clips. Tooling from 10 days, burr-free parts with tight tolerances.
Abrasive waterjet cutting with no heat-affected zone. Cuts steel to 150 mm, stainless, aluminium, stone and composites without thermal distortion.
Send your files today — DFM-checked quotation within 24 hours.